Original water purifier-sudden drop in temperature: warm tips for cold-proof and frost-proof water purification equipment in Binfu Kangs whole house

Today's original water purifier-the temperature drops sharply: the warm reminder of the cold and frost-proof water purification equipment of Binfu Kang's whole house.

Is there a coup for antifreeze water purifier? How to antifreeze water purifier

        The cold winter is approaching, dear friends, please remember: to tie autumn clothes into long trousers, and long trousers into socks, this is the minimum respect for winter! At the same time, our water purifiers have to survive the winter. If you want to clean the water for a long time, drinking water is worry-free. Just need your love!

★Antifreeze Coup 1: Wear winter clothes to keep the water purifier warm.

       Generally, during normal use during the day, it is recommended to wrap the outside of the machine with clothing or straw to isolate the water purifier from the cold air at night to keep it warm. Add thermal insulation cotton. For the northern or northeastern regions where the winter is relatively cold, you must do a good job in the insulation of the machine, so as to reduce the chance of freezing and freezing the water purifier.

★Anti-freezing coup two: close the sluice at night and empty the water.

       Under normal circumstances, the temperature at night is relatively low, which is when it is easy to freeze, and little water is used at night, which reduces the fluidity of the water in the water pipe. Therefore, it is easy to freeze the water in the pipeline, which can cause the water pipe to burst, and the filter element of the water purifier is damaged. For this reason, when you sleep at night, it is recommended to close the sluice to minimize the burden of water pressure on the water purifier, and at the same time let the remaining water in the water purifier empty. Many families neglect the anti-freeze awareness of the water purifier and are often damaged by freezing when the weather is cold, which damages the RO filter element and the inside of the machine, causing the water purifier to fail to operate normally.

★Antifreeze coup three: Keep the surface of the water purifier dry to prevent damage caused by icing.

       We all know that most of the reasons why water purifiers are damaged by freezing are due to the freezing of water and the freezing of the surface of the material at low temperature, which leads to instability of the molecular structure, and the material is often damaged due to thermal expansion and contraction. Therefore, as much as possible to ensure that the surface of the water purifier is dry. Whether for outdoor or indoor water purifiers, if the surface of the machine is not guaranteed to be dry, it is very easy to freeze. According to statistics, more than 80% of the water purifiers that are damaged by freezing are due to the freezing of the water on the surface, which reduces the temperature of the water purifier and causes the entire water purifier parts (filter element, PE pipe, water valve) to be frozen.

★Anti-freezing coup four: The water purifier must be stopped below zero

       For water purifiers installed indoors, the room temperature must not be lower than 0 degrees Celsius, and the use must be stopped below zero degrees. Especially in equipment rooms and balconies, the volume of water will expand during the solidification process. If it freezes, all pipes, filter bottles, membrane shells, and fuselages of the machine will burst, resulting in water leakage. Although outdoor insulation measures should be taken, it is also forbidden to use it below 0 degrees.

★Frost-proof Coup 5: Things to pay attention to when traveling

       First cut off the water source, power supply and turn off the ball valve, and then drain all the water in the whole machine, pressure barrel and filter bottle. This is to prevent water leakage and reduce losses in the event of freezing and cracking under unattended conditions. 

For the wholesale of original water purifiers, please find Mr. He.

The following are the first-aid measures for common problems of water purifiers in winter:

1. Once the machine is frozen, how to deal with it when it freezes

       The water purifier must be placed in a room with a room temperature higher than 10℃ for 48 hours before it can be turned on after it has been naturally thawed. During this time, the machine cannot be forced to boil the water, otherwise it will cause damage to the machine. Check whether there is water leakage after turning on the machine, and confirm that it is normal. Only then can the water source be connected to the power source, and it is recommended to drain the bucket of water produced. If water leakage occurs, please re-tighten the corresponding parts or contact the dealer.

       We can see that the manual describes that the ambient temperature of the machine is 4~38 degrees Celsius. With the advent of winter, once the ambient temperature is lower than 5 degrees, the failure rate of the water purifier will increase, so we must pay attention to it when using it and take precautions. , So as not to cause unnecessary losses.

2. It is normal for the water output of the water purifier to decrease in cold winter

       In winter, the water output of the water purifier in the house drops. Reason: It is directly related to temperature. Under normal circumstances, the lower the temperature, the flow rate of water production will also decrease, mainly because the viscosity of water is affected by temperature, and the water production of the filter element will decrease. Generally, the water production in winter is about the water production in summer. About 50% is a normal value, so there is no need to worry about machine damage.

3. The water pipe is frozen and cracked and the water is cut off. The water purifier must be dealt with urgently

       If the temperature is too low, it is easy to cause the tap water pipe to burst. If the tap water supply pipe freezes and cracks, try not to use the water treatment equipment at home during the water cut. The correct approach is: close the water inlet ball valve of the water purifier at home, and after the water comes in, turn on the home faucet to discharge large particles such as sediment in the water supply pipe, and then open the water inlet ball valve to make the water purifier normal Work; this can effectively prevent the sand and rust mixed in the construction process from entering the water purifier, resulting in a drop in the water flow rate or clogging of the filter element.